WAGNER 500 ton
WAGNER 500 ton
Location:Sant'Ambrogio di Torino, Italy
Specifications
| Manufacturer | WAGNER |
| Year | 1980 |
| Condition | Used |
| Stock Number | 387 |
| Ton | 500 |
| Frame (H/C) | H frame |
| Inspection | 2010 |
| Conditions | WORKING |
| Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) | ECCENTRIC |
| Table - width (mm) | 1800 |
| Table - x (mm) | 1800 |
| Slide - x (mm) | 1800 |
| Table - y (mm) | 1000 |
| Slide - y (mm) | 1000 |
| Number of strokes / min | 0-30 |
| Slide - stroke (mm) | 300 |
| Slide - registration (mm) | 140 |
| Piston rods | 2 |
| Number of strokes/minute | 0-30 |
| Subtype (DM / CDC) | DOUBLE UPRIGHT |
| Slide - number of guides | 8 |
| Revision | REVIOSIONATA 2010 |
| Slide - adjustament system (guided/sphere/wedge) | GUIDED |
| Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) | ECCENTRIC |
| Tdc span (mm) | 1100 |
| Front span between the pillars (mm) | 1850 |
| External dimensions - X (mm) | 3000 |
| Lateral window (mm) | 800 |
| Table - depth (mm) | 1000 |
| Slide - width (mm) | 1800 |
| External dimensions - Y (mm) | 2000 |
| External dimensions - height (mm) | 6000 |
| Slide - depth (mm) | 1000 |
| Weight (ton) | 50 |
| Foundation (cm) | 100 |
| Push points | 2 |
| Safety protections (frontal/posterior) | FRONTAL AND POSTERIOR |
| Electrical panel conditions (working/missing/complete inspection/inspection required) | COMPLETE INSPECTION (2011) |
| Accessories / other data | ELMEA L500 POWER SUPPLY |
| Sled - number of guides | 8 |
| Slide - adjustment system (guided / ball / wedge) | GUIDED |
| Front gap between uprights (mm) | 1850 |
| Light pms (mm) | 1100 |
| External dimensions - height above ground (mm) | 6000 |
| External dimensions - depth (mm) | 2000 |
| External dimensions - width (mm) | 3000 |
| Side window between the uprights (mm) | 800 |
| Safety protections (front / rear) | FRONT AND REAR |
| Conections electrical panel (working, missing, overhauled, to be overhauled) | REVISED 2011 |