ERFURT 500 tons
ERFURT 500 tons
Location:Ferrara, Italy
Specifications
| Manufacturer | ERFURT |
| Model | PKZZ IV500 -1- FS |
| Year | 1987 |
| Condition | Used |
| Stock Number | 127 |
| Ton | 500 |
| Frame | H FRAME |
| Table - width (mm) | 2800x1800 |
| Slide - stroke (mm) | 500 |
| Inspection | 2010 |
| Number of strokes/min | 20 |
| Subtype | DOUBLE UPRIGHT |
| Table - x | 2800 |
| Revision | 2010 |
| Travola - extractable - front | YES |
| Table - y | 1500 |
| Sled - push points | 2 |
| Table - extractable - frontal | YES |
| Sled - width | 2800x1800 |
| Slide - piston rods | 2 |
| Sled - registration | 500 |
| Mold assembly - PMS light | 1620 |
| Extractable - frontal | YES |
| Blank holder cushion - stroke (mm) | 250 |
| Slide - stroke - mm | 500 |
| Piston rods | 2 |
| Slide - registration | 500 |
| Electrical components - motor power (kw) | 50 |
| Slide - number of strokes/minute | 20 |
| Die cushion - total strength (ton) | 100 |
| PMS light | 1620 |
| Side window between the pillars | 1600 |
| Number of strokes / min | 20 |
| Total strength | 160 |
| External dimension - x (mm) | 4000 |
| Running | 250 |
| Height above ground | 7000 |
| Mould mounting - tdc span (mm) | 1620 |
| Weight | 120 |
| Motor power | 50 |
| Mould mounting - lateral window (mm) | 1600 |
| External dimension - y (mm) | 2500 |
| External dimension - height (mm) | 7000 |
| Die cushion - stroke (mm) | 250 |
| Slide - x | 2800 |
| External dimension - weight (ton) | 90 |
| Stroke - mm | 500 |
| Slide - y | 1500 |
| Travola - removable - front | YES |
| Tdc span | 1620 |
| Number of strokes/minute | 20 |
| Lateral window | 1600 |
| X | 4000 |
| Y | 2500 |
| Stroke | 250 |
| Height | 7000 |
| Sled - number of strokes / min | 20 |
| Mold assembly - pms light | 1620 |
| Mold assembly - side window between the uprights (mm) | 1600 |
| Side window between the uprights | 1600 |